major ratings and characteristics values units 10 a 150 v 0.69 v, typ -65 to 150 electrical: mechanical: * ultra-low forward voltage drop * molded plastic to-220ab, to-262, to-263, and * reliable high temperature operation ito-220 packages * super barrier design * softest, fast switching capability * 150 o c operating junction temperature www.apdsemi.com version 1.0 - a ugust 2006 1 sbr10150ctb using state-of-the-art sbr ic process technology, the following features are made possible in a single device: case styles device optimized for ultra-low forward voltage drop to maximize efficiency in power supply applications sbr10150ct SBR10150CTF sbr10150cti sbr10150ct v rrm SBR10150CTF sbr10150cti characteristics i f(av) rectangular waveform v f @ 5a, tj=125 tj (operating/storage) to-220ab ito-220 to-262 to-263 sbr10150ctb _ ______________________________________________________________________________________________ _ 1 3 2 anode common cathode anode 1 3 2 anode common cathode anode 1 3 2 anode common cathode anode 13 2 anode common cathode anode
symbol units v rm v rwm v rrm volts i o amps i fsm amps i rrm amps v f * volts i r ma dv/dt v/us r jc o c/w t j o c * pulse width < 300 us, duty cycle < 2% http://www.apdsemi.com version 1.0 - august 2006 2 _ ______________________________________________________________________________________________ _ max 0.2 25 maximum instantaneous reverse current at rated v rm t j = 25 o c t j = 125 o c typ --- --- -65 to +150 2 4 10,000 operating and storage junction temperature maximum rate of voltage change (at rated v r ) maximum thermal resistance jc (per leg) package = to-220ab, to-262, & to-263 package = ito-220 peak repetitive reverse surge current (2us-1khz) sbr10150ctb dc blocking voltage working peak reverse voltage peak repetitive reverse voltage 150 sbr10150ct average rectified forward current (rated v r -20khz square wave) - 50% duty cycle SBR10150CTF sbr10150cti maximum ratings and electrical characteristics (at 25 o c unless otherwise specified) typ --- --- instantaneous forward voltage (per leg) i f = 5a; t j = 25 o c i f = 5a; t j = 125 o c 10 max 0.88 0.79 120 2 peak forward surge current - 1/2 60hz
www.apdsemi.com version 1.0 - a ugust 2006 3 sbr10150cti _ ______________________________________________________________________________________________ _ sbr10150ct SBR10150CTF figure 3: current derating, case (per leg) figure 1: typical reverse current (per leg) figure 2: typical forward voltage (per leg) sbr10150ctb 0 1 2 3 4 5 0 25 50 75 100 125 150 tc, case temp (c) if, average forward current (amps) 0.01 0.1 1 10 100 10 30 50 70 90 110 130 150 vr, reverse voltage (volts) ir, reverse current (ua) tj=25c tj=100c tj=125c tj=75c 1 10 100 500 600 700 800 900 1000 1100 vf, instantaneous forward voltage (mv) if, instantaneous forward current (amps) tj=125c tj=100c tj=25c tj=75c apd semiconductor reserves the right to make changes without further notice to any products herein. apd semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does apd semiconductor assume any liability arising out of the application or use of a ny product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in apd semiconductor data s heets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. apd semiconductor does not convey any license under its patent rights nor the rights of others. apd semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the apd semiconductor pr oduct could create a situation where personal injury or death may occur. should buyer purchase or use apd semiconductor products for any such unintended or unauthorized application, buyer shall indemnify and hold apd semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that apd semiconductor was negligent regarding the design or manufacture of the pa rt.. 1 lagoon drive, suite 410, redwood city, ca 94065, usa ph: 650 508 8896 fax: 650 508 8865 homepage: www.apdsemi.com email: info@apdsemi.com
|
